Needle Threader - Texi BLACK&WHITE Bedienungsanleitung

NEEDLE THREADER

Lower the presser foot. Set needle in up position.
1. Lower the threader slowly and draw thread through guide and pull toward the
right.
2.
Lower the lever as far as will go.
3.
Rotate the lever to the rear of the machine and the hook pin will go through the
needle eye.
4. Draw thread through the hooked end.
5. Hold thread loosely and slowly return lever hook to original position. Hook will
turn and pass thread through needle eye.
6. Release the lever and pull thread out about 10 cm from needle eye.
CAUTION! Do not lower the threader lever while machine is operating.
NOTE: For smooth threading it is recommended you select straight stitching when
using the needle threader. Automatic needle threader cannot be used for double
needle.
Texi Black&White INSTRUKCJA 2018.indb 89
Texi Black&White
EN
89
11.04.2018 16:28