Whirlpool WBC3547ANFX Bedienungsanleitung Seite 6

While the appliance is working to reach the factory-set
temperature, an acoustic alarm sounds and temperature symbol
on the freezer display flashes (- -). This indicates that the
appliance has not yet reached the optimal temperature for
storage of foodstuffs.
Press and hold the button "OK" until the acoustic alarm disables.
The icon disappears when the freezer compartment reaches a
temperature below -12°C, the display will show the temperature
-18°C.
After being switched on, the refrigerator needs from 2 to 3
hours to reach the correct temperature to store a typical
volume of food in the refrigerator compartment.
Important:
• If food is placed in the refrigerator before the appliance has
cooled completely, it may deteriorate.
• Turning the refrigerator and freezer controls to a cooler than
recommended setting will not cool the compartments any
faster.
• A built-in exterior moisture control continuously guards
against moisture build-up on the front edges.
Do not be alarmed if these edges sometimes feel warm to the
touch.
The inside light switches on when the refrigerator door is
opened. After 10 minutes of door opening the light switches off.
GUIDE TO SELECTING FUNCTIONS
(depending on the model)
Functions are not available until freezer compartment reaches
the temperature below -12°C.
Functions and settings for the refrigerator compartment.
Refrigerator compartment door open
Refrigerator compartment temperature setting
Vacation
This function turns the refrigerator compartment to a
warmer state if you are going away for some time.
To select the function, keep pressing the menu button
until the display shows the vacation symbol .
Press "OK" to confirm. To turn the refrigerator back to
setting point repeat this procedure.
Important: after activating this function, remove all
perishable foodstuffs from the refrigerator compartment
and leave the door closed, since the refrigerator
maintains a suitable temperature to prevent the
formation of unpleasant odours.
ON/OFF
This function turns off both the refrigerator and freezer
compartments.
To enable the stand-by function, press & hold the "On-
Off" button for 3 seconds, two hyphens appear on both
display to indicate that the appliance is in stand-by. To
switch the appliance on again, follow the same procedure
until the previously set temperature is shown on the
display. When the appliance is in stand-by the light inside
the refrigerator compartment does not work.
D GB F
PRODUCT SHEET
NL E P I GR
Remember that this operation does not disconnect the
appliance from the power supply.
Fridge Stand-by
This function turns off the fridge compartment while the
freezer compartment continue to run.
To enable the stand-by function, press & hold the "Fridge
stand-by" button for 3 seconds. To switch the fridge
compartment on again, follow the same procedure until
the previously set temperature is shown on the display.
When the fridge compartment is in standby the light
inside the refrigerator compartment does not work.
Functions and settings for the freezer compartment
Freezer compartment temperature setting
Fast freezing
For more efficient freezing activate this function 24 hours
before freezing fresh food. To select the function, keep
pressing the menu button until the display shows the fast
freeze symbol
Press "OK" to confirm.
After 24 hours place the food to be frozen in the middle
basket of freezer compartment.
The function is automatically disabled after 48 hours, or
can be manually disabled by repeating the same
procedure.
Party mode
To select the function, keep pressing the menu button
until the display shows the party mode symbol
The symbol flashes, press "OK" to confirm. Use this
function to chill drinks inside the freezer compartment.
When the function is in operation, the symbol is
animated. 30 minutes after selection (the time required
to chill a 0.75 l bottle without the glass breaking), the
symbol flashes, an acoustic alarm sounds and the display
lights up: remove the bottle from the freezer
compartment and press the "OK" button to disable the
function.
Important: do not leave the bottle inside the freezer
compartment longer than the time necessary for chilling.
Appliance, alarm and malfunction symbols
"6th Sense" function
The 6th Sense function is automatically activated when:
• a large amount of food is loaded into the refrigerator
and/or freezer
• the refrigerator and/or freezer door is left open for a
long time
• a prolonged power failure takes place, causing the
internal temperature of the appliance to increase to
values that cannot guarantee safe storage of food.
Control panel lock function
This function prevents anyone from inadvertently
changing settings or switching off the appliance.
S N DK FIN PL
.
CZ SK H RUS BG
GB
.
RO