Klarstein QUICKSTICK Bedienungsanleitung Seite 14

EN
Switching on the appliance
Press and hold the POWER button for 3 seconds. The first line of the display shows
the set water temperature. The second line of the display shows the current water
temperature. The third line of the display shows the set time and the operating
time. Press the (+) and (-) buttons simultaneously to switch between ℃ and ℉.
Setting the time and temperature
Press the SET button and then use the (+) and (-) buttons to increase or decrease
the hour value. Press the SET button a second time and then use the (+) and (-)
buttons to increase or decrease the minute value. Press the SET button a third
time and then use the (+) and (-) buttons to increase or decrease the temperature.
The time can be set between 00:00 and 59:59 minutes. The temperature can be set
between 0 °C (32 °F) and 95 °C (203 °F).
Start cooking process
After all settings have been made, press the POWER button to start the cooking
process. Put the food in the container when the water temperature has reached
the set temperature.
When the water temperature reaches the set temperature, the appliance beeps
every 5 seconds. It informs you that you should put in the food. Press and hold the
SET button for two seconds to turn off the sound. If you have previously set the
time, the unit starts measuring the time at that moment and displays it after one
minute.
When the set time has elapsed, the unit beeps every 5 seconds. It informs you that
you should remove the food.
Switching off the appliance
When all the food has been prepared and removed, switch off the appliance. To
do this, press and hold the POWER key for 5 seconds. When you are not using the
device for a longer period of time, pull the plug out of the socket.
14