Service; Safety Instructions For Drills; Original Accessories/Attachments - Parkside PABS 20-Li F7 Originalbetriebsanleitung

f) Do not expose a battery to fire or excessively
high temperatures. Fire or temperatures in
excess of 130°C (265°F) can cause an ex plo­
sion .
g) Follow all instructions regarding charging
and never charge the battery or the cordless
tool outside of the temperature range given in
the operating instructions. Incorrect charging
or charging outside of the permissible tempera­
ture range can destroy the battery and increase
the risk of fire .
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable
batteries.
battery from heat (for example, from
continuous exposure to sunlight), fire, water
and moisture. There is a risk of explosion .

6 . Service

a) Have your power tool serviced by a qualified
repair person using only identical replace­
ment parts. This will ensure that the safety of
the power tool is maintained .
b) Never try to repair damaged batteries.
Battery maintenance should only be carried out
by the manufacturer or an approved customer
service centre .
■ 20 │ GB │ MT
Protect the rechargeable

Safety instructions for drills

Safety instructions for all work
■ Hold the appliance by the insulated gripping
surfaces when carrying out work during
which the screws or the accessory tool may
hit concealed power lines. If the accessory tool
or the screws come into contact with a live wire,
this may make exposed metal parts of the
power tool live and result in an electric shock .
■ Collect any dust that is produced; for example,
using a vacuum cleaner .
Safety instructions when using long drill bits
■ Do not use a higher speed than the maximum
permissible speed for the drill bit. At higher
speeds, the drill bit can easily bend if it is
allowed to rotate freely without being in contact
with the workpiece, which may lead to injuries .
■ Always start drilling at a low speed and with
the drill bit in contact with the workpiece. At
higher speeds, the drill bit can easily bend if it is
allowed to rotate freely without being in contact
with the workpiece and this can lead to injuries .
■ Do not exert excessive pressure, and only
apply pressure along the length of the drill bit
(no lateral pressure).
Drill bits can bend and and break which can
lead to a loss of control and injuries .

Original accessories/attachments

■ Use only the accessories and attachments
which are specified in the operating instructions
and are compatible with the appliance .
WARNING!
■ Do not use any accessories which have not
been recommended by PARKSIDE . This can
lead to electric shock and fire .
PABS 20-Li F7