Control Panel; Display And Operating Elements On The Control Panel; Error Indication; Indication Of The Operating Mode - OEG CPA-E 100-Serie Bedienungsanleitung

36

6. Control panel

6.1. Display and operating elements on the control panel

6.2. Error indication

Position 6 indicates the status of the pump when being switched on.
Speed indication lights up continuously = operation
Speed indication is blinking = error
Column 1 (left) blinking :
Column 2 blinking :
Column 3 blinking :
Column 4 blinking :
Column 5 blinking :
Column 6 blinking :
Column 7 blinking :
Warning
Separate the pump from the power supply before you
eliminate the error. Do not reconnect the pump before
the error has been eliminated.
High-efficiency wet-running circulation pump with screwed or flanged connection
GB
OEG CPA-E 100 series
1. Indication of the flow volume
during operation
2. Key to reduce the speed

3. Indication of the operating mode

4. Setting of the operating mode
5. Key to increase the speed
6. Speed indication
Voltage too high
Voltage too low
Too much flow
Phase failure
Starting error/pumped blocked
Power too low
Temperature too high