I-Tech MIO-IONOTENS Benutzerhandbuch Seite 48

Guidance and manufacturer's declaration – ELECTROMAGNETIC IMMUNITY –
MIO-IONOTENS is intended for use in the electromagnetic environment specified
below. The customer or the user of the device should assure that it is used in such
an environment.
Immunity test
IEC 61000-4-4
Impluses
IEC 61000-4-5
Voltage dips, short
interruptions and
voltage variations
on power supplì
input lines
IEC 61000-4-11
Power frequency
(50/60 Hz) magnetic
field
IEC 61000-4-8
Note: U is the A.C. mains voltage prior to application of the test level.
T
IACER Srl
FOR ALL EQUIPMENT AND SYSTEMS
Test level
Compliance level
IEC 60601
±1kV ±1kV
for input/output for input/output
lines lines
±0.5kV, ±1kV ±0.5kV, ±1kV
Line(s) to line(s) Line(s) to line(s)
±0.5kV, ±1kV, ±0.5kV, ±1kV,
±2kV ±2kV
Line(s) to earth Line(s) to earth
0% U a 0°, 45°, % U
T
90°, 135°, 180°, 90°, 135°, 180°,
225°, 270° and 225°, 270° and
315° for 0,5 315°
cycles cycles
0% U 0% U
T
for 1 cycle and for 1 cycle and
70% U 70% U
T
for 25/30 cycles for 25/30 cycles
at singular phase at singular phase
0° 0°
0% U for 0% U
T
250/300 cycles 250/300 cycles
30A/m
48
Electromagnetic
environment - guide
typical commercial or
hospital environment.
Mains power quality
should be that of a
typical commercial or
hospital environment.
a 0°, 45°, Main power quality
T
should be that of a
typical commercial or
for 0,5 hospital environment.
If the user of MIO-
IONOTENS
continued operation
T
during power mains
interruptions,
T
recommended
MIO-IONOTENS
powered
uninterruptible
for power supply or a
T
battery.
Power
magnetic
should be at levels
30A/m characteristic
typical location in a
typical commercial or
hospital environment.
requires
it is
tha
be
from an
frequency
fields
of a
MNPG176-07