Cleaning, Care & Maintenance - BOLERO DL833 Bedienungsanleitung

EN
Step 2:
• Place back panel (B) into the back slot with the
warning instructions facing backward.
• Place seat (C) into the slots with the waist
belt's locking ends hanging downward.
• Insert barrier bar (D) into the slot on the side
panel.
2
D
C
Step 3:
• Tap foot rest (E) into its slots. Install bolts and
make sure that the angle cuts on ends are
properly aligned with shorter width at top.
• Tap in stretchers (F) and install all remaining
connector bolts.
• Check chair balance and tighten all bolts to
complete assembling. Bolts can come loose
over time. Check bolts for tightness and
re-tighten periodically.
3
E
6
DL833_DL900_DL901_ML_A5_v4_20220114.indb 6 DL833_DL900_DL901_ML_A5_v4_20220114.indb 6
Step 4: Using the harness
•
•
•
B
Cleaning, Care &
Maintenance
•
•
•
Compliance
BOLERO parts have undergone strict product
testing in order to comply with regulatory
standards and specifications set by international,
independent, and federal authorities.
This product conforms to:
F
F
Every effort is made to ensure all details are correct at the time of going
to press, however, BOLERO reserve the right to change specifications
A five-point safety harness is provided to
restrain your child and should always be worn.
To fasten, insert the side clips 'g' into the
centre buckle 'h'. Adjust the sliding adjusters 'i'
to suit your child.
To release, press the side clips at points 'j' and
remove from buckle.
4
Clean with a damp cloth.
Polish with a suitable wood polish.
Regularly check excessive wear of components
and tighten all bolts.
EN 14988:2017+A1:2020
AS 4684-2009
All rights reserved. No part of these instructions may be produced
or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording or otherwise, without the prior written
permission of BOLERO.
without notice.
2022/1/14 16:18 2022/1/14 16:18