Slave
1
2
1
2
Slave
ALARM
1
CAM2
2
(720P/1080P/TVI/CVI/CVBS)
CAM1
(720P/1080P/TVI/CVI/CVBS)
ALARM
4C
DOOR1
(720P/1080P/TVI/CVI/CVBS)
Multi monitor connection
The default mode of the monitor is Master mode.
Multiple monitors connected, ensure that the wiring and settings are correct as follows.
1. Connect from "Out" port of Master monitor to the "In" port of Slave monitor.
Connect from "Out" port of the last monitor to the "In" port of the next monitor.
2. Set as Slave mode for all the Slave monitors
Mode
Door 2 status
Door 1 unlock time
Door 2 unlock time
Key backlight
Touch sound
Door panel backlight
GB-5
Monitoring
Talk
Unlock
Hang up
4C
Monitoring
Talk
DOOR2
Unlock
Hang up
4C
Monitoring
Talk
Master
Unlock
Hang up
(AHD Monitor)
4C
DOOR2
(720P/1080P/TVI/CVI/CVBS)
Slave
Off
08 sec.
05 sec.
On
On
On
DESCRIPTION ON INDOOR UNIT
1
2
1
2
3
4
5
Name
Power LED, the power indicator of the indoor monitor.
1
The door 1 state lights, to door 1 working when the LED is on.
2
The door 2 state lights, to door 2 working when the LED is on.
View visitor's image displayed on the TFT screen.
TFT display
Microphone
Transmit the voice to outdoor camera.
1. Transfer call, during conversation with the doorbell, press this
button to intercom call or transfer calls to another indoor monitor.
2. Internal call, when all the indoor monitors are in standby mode,
Transfer call
press this button to intercom call to another indoor monitor.
Monitoring, press the button to watch the outdoor bell and CCTV
camera images.
Monitoring
8
Talk, press this button to activate conversation mode.
Talk
Unlock, release the door lock.
9
Unlock
1. Hang up, press this button to end conversation mode.
2. Press this button to return to previous menu or cancel the
10
Hang up
selection.
The button is a composite key, users can press the button,
11
scroll the button upward or downward to configure the parameters.
Setting
Speaker
12
Hear the sound from outdoor doorbell.
TF card interface, insert the TF card to store video recordings and photographs,
supports up to 64GB. Video recoding files will be stored in the TF card,
photographs will be stored in the TF card of the indoor monitor firstly. In case
13
TF card slot
there is no TF card in the device, snapshots will be stored into the flash of the
device. And suggest that it's better to use a TF card more than class 10 onto
the device.
6
11
12
7
Monitoring
8
Talk
9
Unlock
13
TF
10
Hang up
Descriptions
GB-6