KERN CXB-Serie Betriebsanleitung Seite 70

8.4.2 Call-up
When the reference weight is required at a later point in time it can be called by
pressing the key and entering the relevant storage location number.
Press button
PlSET
a
PRE-
TARE
Enter memory location (0 - 9) via number keys and the stored reference weight will
appear.
0. 0
a
PRE-
TARE
8.5 Count with tolerance control - Fill to target
This function can be used to program a target number of pieces or target weight.
Reaching the target value is indicated by an audio-visual signal.
8.5.1 Set tolerance value for target number of pieces
[ -0.TX- ] is flashing in reference weight window.
Press button
-----
a
PRE-
TARE
Use number keys to enter desired target number of pieces
-----
a
PRE-
TARE
24
100
0
100
Entered target value.
Corrections possible by
pressing key
M+
0
M+
300
M+
Last value stored
300
M+
Last value stored
CXB/CXP-BA-e-0812