Maintenance And Storage - Grizzly ARM 2433-21 Originalbetriebsanleitung

GB
- if the apparatus starts to vi-
brate excessively, an imme-
diate check is required.
- make sure that all nuts, bolts
and screws are properly
tightened.
- inspect the apparatus for
any damage.
- have any necessary repairs
carried out to damaged
parts.
• Do not place feet or hands
near or under rotating parts.
Do not stand in front of the
grass ejection hole during sick-
le mowing.
• Always pull the circuit breaker/
ignition key if:
- you leave the apparatus
unattended, before clearing
blockages,
- if you check or clean the ap-
paratus or work on it,
- after a collision with a foreign
object. Immediately examine
the device for damage and, if
necessary, have it repaired,
- if the apparatus starts to
vibrate in an unusual way
(check immediately!).

Maintenance and Storage:

• Allow the motor to cool before
storing the equipment in a con-
fined space.
• During maintenance of the cut-
ting blades, be aware of the
fact that even if the power sup-
ply is switched off, the cutting
blades can be set into motion.
• When servicing the cutting
blade on it that even if the volt-
22
All manuals and user guides at all-guides.com
age source is switched off, the
cutting blade can be moved.
• Ensure that all nuts, bolts
screws are tightened firmly and
the equipment is in safe work-
ing condition.
• Do not attempt to repair the
equipment yourself unless you
have been trained to do so.
Any work not specified in these
instructions is to be carried out
only by customer service cen-
tres that we have authorised.
• Keep the equipment in a dry
location and out of reach of
children.
• Handle the equipment with
care. Keep tools sharp and
clean, in order to facilitate bet-
ter and safer work. Follow the
maintenance instructions.
• Wear protective gloves when
changing the cutting device.
• Regularly check the grass col-
lection device for wear and
strains. For safety reasons, re-
place worn or damaged parts.
When adjusting the blades,
take particular care to avoid
fingers being trapped between
the rotating blades and fixed
parts of the machine.
• Check that only replacement
tools authorised by the manu-
facturer are used.
Electrical Safety:
• Avoid body contact with
earthed surfaces such as
pipes, radiators, cookers and
refrigerators. There is an in-
creased risk of electric shock if
your body is earthed.
and