Getting To Know The Label Maker; Power; Lcd Display; Format - Dymo LabelManager 420P Bedienungsanleitung

To print a label
Enter text to create a simple label.
1
Press .
2
Press the cutter button to cut
3
the label.
Remove the paper backing from the
4
label to expose the adhesive, and
then attach the label.

Getting to Know the Label Maker

Become familiar with the location of the feature and
function keys on your label maker. Refer to Figure 1. The
following sections describe each feature in detail.

Power

The button turns the power on and off. After ten
minutes of inactivity, the power is switched off
automatically. When the printer turns off, the last label
created is remembered and displayed when the power is
turned back on. The previously selected style settings are
also restored.

LCD Display

The display can show four lines of text at a time. The
number of characters displayed on each line will vary due to
proportional spacing.
With DYMO's exclusive graphical display, most of the
formatting you add is visible instantly.
1
2
3
4 5
Feature indicators along the top and right of the LCD
display appear black to let you know when a feature
is selected.
Font
1

Font size

2
Edit area
3
Mirror text
4
Vertical text
5
Text alignment
6
Auto-numbering
7

Format

The key displays the Font, Font Size, Style, Borders,
Mirror, Vertical, Alignment, and Label Length
submenus. These formatting features are described
later in this User Guide.
Split
backing
Figure 6
13
12
11
10
9
6 7 8
Barcode
8
Accented character
9

Shift

10
Uppercase
11
Battery
12
Fixed label length
13
Font Size
The key displays the Font Size menu. This formatting
feature is described later in this User Guide.

Insert

The key allows you to insert symbols, clip art,
Insert
barcodes, auto-numbering, the date and time, or saved
text on your label. These features are described later in
this User Guide.

Settings

The key displays the language, units of measure, label
width, and date/time submenus.

CAPS Mode

The key toggles capitalization on or off. When Caps
mode is on, the Uppercase indicator is shown on the
display and all letters that you enter are capitalized. When
Caps mode is off, all letters appear in lowercase. The
default setting is Caps mode on.
Shift
The key is used to select a symbol printed on a numeric
Shift
key. For example, when you press
appears in the display; however, if you press
, an apostrophe (') appears in the display.
You can also use the
for a single alpha character.

Backspace

The key removes the character to the left of the cursor.
You can also use the
making a selection.

New Label/Clear

The key gives you a choice to clear all label text, just the
text formatting, or both.

Navigation Keys

You can review and edit your label using the left, right, up
and down navigation keys. You can also navigate through
menu selections using the navigation keys, and then press
to make a selection.

Cancel

The key allows you to exit from a menu without making
a selection or to cancel an action.

Preview

The key displays a preview of your label layout. The
preview shows how the text will print on the label, and the
label length.
5
, the number 8
Shift
key to toggle Caps mode on or off
Shift
key to exit from a menu without
and then