Paper - Olivetti JP 90 Bedienungsanleitung

All manuals and user guides at all-guides.com

Paper

Precautions
•
The paper must not be crumpled or torn, otherwise it may
jam or even not be inserted. Always use paper in perfect
condition and within the specifications defined (see the
section Paper ).
•
Make sure the paper feeds smoothly, and that it is not held
too tightly nor has too much play.
•
If you remove the paper from the ASF, you MUST repeat
the entire paper loading operation from the start.
•
If there is no operator panel or printer operation for more
than 60 seconds, any paper inserted in the printer will be
expelled.
•
Always make sure there is no paper inserted for printing
before switching off the printer.
•
Printing on both sides of the paper may cause smudging.
1. Nopaper.
If, on a print command, there is no paper to load in the
printer,theFORM FEEDlightindicatorflashesslowly.
To clear this condition,load up to 15sheets of paper into
the ASF and press the FORM FEED key on theoperator
panel.
28
2. Paperdoesnotload.
•
Check that the size and weight of the paper used are
within the limits allowed.
•
If you removed the paper from the ASF, you must repeat
the entire paper loading operation.
•
Make sure the paper is not feeding in crookedly.
•
Paper jamming - point 3 in this paragraph.
•
Make sure the correct paper feed device is selected in
your printer driver, load paper in the ASF and press the
FORM FEED key on the operator panel.
3. Paperjamsortears.
The most common cause of paper jamming is the
non-observance of the paper loading procedure. When
adding paper to the paper input tray or after removing
jammed paper, ALWAYS remove any paper already in the
paper input tray and reload it all as a single pack.
•
Set the printer OFF LINE (On Line LED off).
•
Hold down the FORM FEED key while pulling the jammed
paper carefully back out of the printer.
DO NOT pull the jammed paper out through the front of
the printer as this can damage the print mechanism.
•
Check that the paper output tray is not overloaded
(capacity 10 printed sheets).
It is a good idea to remove any printed sheets from the
paper output rack before starting a new printing operation.
User Guide - Troubleshooting