IKEA LAGAN AA-2189589-3 Bedienungsanleitung Seite 22

ENGLISH
5
D
Put the flat filter (A)
back in place. Make
sure that it is
correctly positioned
under the 2 guides
(D).
An incorrect position of the filters
can cause bad washing results
and damage to the appliance
Cleaning the filter of the inlet hose
1
Close the water tap.
3
Clean the filter of
the inlet hose.
6
Reassemble the
filters (B) and (C). Put
them back in the
filter (A). Turn the
handle clockwise
until it locks.
2
A
Disconnect the hose.
Turn the fastener A
clockwise.
4
Cleaning the lower spray arm
We recommend to clean the lower spray arm
regularly to prevent soil from clogging the
holes. Clogged holes can cause
unsatisfactory washing results.
1
To remove the lower
spray arm, pull it
upwards.
3
To install the spray
arm back, press it
downwards.
Cleaning the upper spray arm
Do not remove the upper spray arm. If the
openings in the spray arm are clogged,
remove the remaining particles of soil with a
thin pointed object, e.g. a toothpick.
2
Wash the spray arm
under running
water. Use a thin
pointed tool, e.g. a
toothpick, to remove
particles of soil from
the holes.
22