EUROM Partytent-heater 1000 Bedienungsanleitung Seite 18

The party-tent heater must be hung so that there is 40 cm of free
space between the decorative cover and any ceiling, tent canvas
etc. The hanging chain measures 40 cm.
Additionally, at least 50 cm of space must be left at the sides,
between the device and any side walls, tent canvas and other
objects. There must also be at least 1.80 m between the ground and
the underside of the control box. The party-tent heater can never be
hung on a hook in the wall as it could hang at a slant!
There are two methods of hanging:
1. On the ceiling
2. On a frame (e.g. a tent frame)
1. Hanging on the ceiling
The party-tent heater must be hung on a concrete ceiling. Never
hang it on a ceiling made of wood, plaster or any other material! The
attachment materials and fire safety measures are not suitable for
this type of installation.
 Seek a location in the ceiling that
fulfils all of the requirements;
 Drill a sufficiently deep hole with
a diameter of 8 mm;
 Knock the key-bolt with hanging
eye into the hole; secure it by
turning clockwise and check that
the hanging eye is screwed into
the key-bolt properly or that the bolt and eye is firmly attached.
Ensure that the attachment kit can bear the weight of at least 10
kg.
 Hang the party-tent heater on the hanging eye with the karabiner
hook so that the party-tent heater is 40 cm from the ceiling.
 Check that the karabiner hook is correctly closed.
18