Creating An Electrical Connection; First Use/Test Run - hanseatic HTW612D Gebrauchsanleitung

2 . Secure the other end on the water inlet
hose to the tap by hand . Then turn the
union nut (33) clockwise .
3 . Open the valve completely and check
whether the connections on the appliance
and on the valve are sealed .
4 . Then close the tap again .
Creating an electrical
connection
WARNING
Risk of electric shock!
Touching live parts may result in severe
injury or death.
■ Do not put into operation if the
mains cord is faulty or the appliance
displays other visible damage.
■ Never connect the appliance via a
multiple socket.
• Plug the mains plug into a properly in-
stalled and earthed electric socket that
has been sufficiently secured (220–240 V,
50 Hz, 10 A) .
Installation, connection and initial commissioning

First use/Test run

The appliance requires an initial wash cycle
without laundry, but with detergent . The aim
(33)
of this is to rinse out possible residues from
production .
1 . Dispense a maximum of 25 ml of compact
2 . Make sure that the washing drum (17) is
3 . Close the washing drum and fold down
4 . Carry on, as described in chapter "Opera-
First use is completed once the cycle has fin-
ished .
detergent into the left chamber II .
empty .
the appliance lid (15) .
tion: Standard cycles" on page EN-20; use
the "Cotton" cycle here .
Page EN-35