voestalpine Böhler Welding WF NX 4000 Classic Bedienungsanleitung Seite 67

8
Welding methods
when it is released, the gas, the voltage and the wire feed are turned off.
Allows welding to be done with three different power levels able to be directly selected and
relative synergic values of the welding parameters.
change automatically to the main values set on the control panel.
post-gas stages.
9
Inductance
Allows electronic regulation of the series inductance of the welding circuit.
Makes it possible to obtain a quicker or slower arc to compensate for the welder's movements and for the
natural welding instability.
1 0
Program key
1 1
Job key
Program storage
Program retrieval
1 2
Wire feed
Allows the manual wire feed without gas flow and without the wire live.
Allows the insertion of the wire into the torch sheath during the welding preparation phases.
63
SYSTEM PRESENTATION
syn
EN