Getting To Know Your Device; Device Description; Initial Use - Beurer ELLE MPE 38 Gebrauchsanweisung

• Overexposure to UV radiation may cause sunburn to the skin. Too frequent exposure to UV radiation may
lead to skin changes and increases the risk of skin cancer.
• If you are aware of any allergy to UV radiation, consult your doctor before using the device.
• Only use light sources of the prescribed type. Failure to comply will invalidate the warranty.
• Protect the device from impacts, humidity, dirt, chemicals, marked temperature fluctuations and direct sunlight.
• Never place any objects on the device. Do not cover the device while it is in operation.
• Repairs must only be carried out by Customer Services or authorised suppliers. Failure to comply will invali-
date the warranty.
• Keep sensitive areas of skin such as scars and tattoos away from radiation.
• Never use the device near open flames or hot surfaces.
• Never pull the mains plug out of the socket using the mains cable or with wet hands.
• Do not use the device if it is visibly damaged, does not function properly or if the mains plug or mains cable
is damaged. In these cases, contact Customer Services.
• The device is not intended for use by people (including children) with restricted physical, sensory or mental
skills or a lack of experience and/or a lack of knowledge, unless they are supervised by a person who has
responsibility for their safety or they receive instructions from this person on how to use the device. Children
must not play with the device. Cleaning and user maintenance must not be performed by children unless
supervised.

1. Getting to know your device

The MPE 38 UV nail dryer is intended for nail art using UV gel. It can be used for manicure as well as pedicure.
The special tunnel-like structure of the device and its reflecting foil incorporated into the interior help to ensure
clean and even drying of the nails. To make cleaning and disinfection more efficient and more comfortable,
the UV nail dryer is equipped with a removable base plate. This also helps to simplify the installation and
replacement of the fluorescent tubes.
The timer function makes using the device even more convenient.

2. Device description

1. Selection switch
2. Start button
1

3. Initial use

• Check to ensure that the package contains all the parts that should be included in the delivery. If any parts
are missing or damaged, contact Customer Services.
• Remove all packaging material.
Warning
Keep packaging material away from children! Choking hazard.
• Place the device on a firm, level and dry surface.
2
8
Control panel
1. 120-second timer
2. Off
3. Continuous operation
Timer On
1
2
3