Inserting The Oven; Before First Use - hanseatic HBCO7010PA1 Gebrauchsanleitung

Inserting the oven

NOTICE
Risk of damage!
■ Only lift the oven using the carrying
handles on the sides. The door is not
suitable for this purpose.
1. The power cord must be fitted to the oven
by a specialist.
2. Use the carrying handles on the side of
the oven to lift it and then push it as far
back into the built-in cabinet so that the
connections and earthing screw for the
hob can still be easily reached.
3. Insert the hob plugs into the sockets on
the back of the oven. Do not use any
force. The plugs are coded. Polarity rever-
sal is therefore not possible.
4. Insert the mains plug into a properly in-
stalled socket
Installing the oven
5. Keep the oven centred and push it fully
into the built-in cabinet.
The mains connection must not be kinked,
pinched or otherwise damaged.
6. Screw the oven to the built-in cabinet with
the two screws which have been sup-
plied.

Before first use

1. Remove all transport safety devices
(cardboard strips, etc.) and all adhesive
strips from the oven.
2. Turn all the oven's dials to zero.
3. Switch on the fuses for the relevant elec-
trical circuit.
4. Thoroughly clean the oven before first
use.
Page EN-37