Abus IPCB34-Serie Bedienungsanleitung Seite 137

1. When using object detection, video recordings on the internal SD card only contain
recordings of detected people or vehicles. Other objects do not resolve a recording on the
SD card.
2. When using object detection and recording the video data to an ABUS NVR, all intruding
objects are first saved as a recording. Filtering can be done subsequently via the ABUS
NVR (local operator interface) or the CMS software (LAN/WAN).
3. Object detection (human / vehicle) and the subsequent filtered display of these recordings
can only be used in conjunction with an ABUS NVR.
4. On the ABUS NVR, video recordings can be displayed filtered by people or vehicles via
the connected monitor (HDMI/VGA) in the "Smart Search" menu. Other motion detection
recordings beyond people and vehicles can be displayed in playback as usual.
5. Filtering of the entire motion-controlled recordings according to people and vehicles is also
possible in the CMS software of connected ABUS NVRs (event playback).
Region:
Sensitivity:
Schedule
To save a schedule, click on "Activate schedule". Specify here on which days of the week and at which times
the alarm output should be active.
The period selection is made by holding down the left mouse button. By clicking on an already marked period,
the details can also be set via keypad or deleted again.
To copy the time selection to other weekdays, move the mouse pointer behind the bar of the weekday already
set and use the "Copy to ..." function.
Apply the settings made by clicking "Save".
Linkage method
Here you can set the action to be performed when an event occurs.
Normal Linkage
Send email:
Notify the surveillance centre:
Uploading to FTP/Memory card/NAS:
Audible warning:
Trigger alarm output
When an event is triggered, existing alarm outputs on the camera can be activated. The behaviour of the
alarm output can be set under "Events / Alarm output".
Trigger recording
Enable this in order to record motion detections onto an SD card.
Number of available areas: 4
higher sensitivity allows smaller objects to be detected.
You receive an email as notification; check the checkbox to activate this.
If an event is triggered, the ABUS CMS software can be
informed. You may then get a picture pop-up, for example.
Check this check box to upload single frames to an FTP server,
the SD card or a connected NAS drive during an event.
This function can output preset or custom tones or sound media.
This requires a camera model with audio output or an integrated
loudspeaker.
138