Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. Installation
To avoid malfunction a minimum
distance between the flow mon-
itor and bends, valves, changes
in cross-section or such like must
be observed:
• Min. 5 x pipe diameter
upstream (A).
• Min. 3 x pipe diameter
downstream (B).
(This information refers to lami-
nar flow).
1. Lubricate the nut (A) with
grease to ensure the nut can
be loosened and tightened
several times. Note: No grease
must be applied to the sensor
tip.
2. Remove the protective cap (B)
from the sensor tip. Insert the
unit into the T-piece.
3. Orientate it (to the longitudi-
nal axis of the pipe or perpen-
dicular to it). Fasten the nut
(max. tightening torque 70 Nm).
Always keep the unit in its ori-
entation.
10
All manuals and user guides at all-guides.com
min.
3 x D
D
min.
5 x D
A B
B
A
Werbung
Inhaltsverzeichnis
