Grizzly EV 1200-31 ZV Originalbetriebsanleitung Seite 47

All manuals and user guides at all-guides.com
Preparations:
• Never allow children and people who
are not familiar with these Operating
Instructions to use the implement.
Local regulations may stipulate a mini-
mum age for operators.
• This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been giv-
en supervision or instruction concern-
ing use of the appliance by a person
responsible for their safety.
• Never start up the implement while
other people, but especially children
and domestic pets, are in the vicinity.
• Check the area on which the imple-
ment is to be used. Remove all stones,
sticks, wire and other foreign bodies
that could be caught up and flung out.
Never use the implement to level out
uneven patches.
• Always wear appropriate protective
work clothes and firm shoes with non-
slip soles, strong long trousers, ear
defenders and goggles. Never operate
the implement while bare footed or
when wearing open sandals.
• Never operate the implement if it is
damaged, incomplete or has been
modified without the consent of the
manufacturer. Never work with dam-
aged or missing protective devices
(e.g. starting lever, unlocking knob,
impact protector).
• Never disengage protective devices
(e.g. by tying the starting lever).
• Children must be supervised in order
to ensure that they do not play with the
equipment.
• Before starting the equipment, ensure
that no objects or branches are pushed
into the blade opening, that the equip-
ment is standing stably and that the
workspace is tidy and not blocked.
Check the condition of your extension
cable and the connecting cable of your
equipment. Use the necessary protec-
tive equipment.
• If your equipment vibrates or emits
unusual noises when switched on,
disconnect the plug from the socket
and check the cutting cylinder. Ensure
that no remains of chopped matter are
blocking the cutting cylinder or jammed
between the blades. If you find no
problems, return the equipment to a
customer service centre.
• If the blades no longer cut correctly or
if the motor is overloaded, check all the
parts of your equipment and replace
the worn parts. If a more extensive
repair is required, contact a customer
service centre.
Use:
• CAUTION – A very sharp tool. Avoid
cutting your fingers or toes. While
working always keep your feet and
fingers well away from the cutting cyl-
inder and the ejector opening. There is
the danger of serious injury!
• Do not operate the implement while it
is raining, in poor weather conditions
and when the surrounding area and
lawn are wet. Operate the implement
only during daylight hours or with bright
lighting.
• Do not operate the implement if you
are tired or are lacking in concentration
and after having drunk alcohol or taken
medicine. Always take a work break in
due time. Approach the work with com-
mon sense.
• Familiarize yourself with the terrain
and remain focused on the potential
hazards that you could miss on ac-
count of the motor noise.
GB
47