Prog (Create Memory List) - auna Graceland Mini Bedienungsanleitung

EN
48

PROG (CREATE MEMORY LIST)

1. Press the STOP button during playback from a music source.
2. Press the PROG button (6) on the remote control or the P/R button on
the control panel to enter the memory mode. "PROG" then flashes in
the lower left corner of the display. A position number also flashes on
the display (e.g. P01).
3. To select the track you want to save, press the button
the PROG button to save your selection.
4. Repeat the above steps to save more tracks.
5. Once you have saved all the tracks you want, you can start playback.
You can do this at any time once you have saved the desired number of
tracks.
6. If you want to stop saving the tracks, press the STOP button.
7. When the maximum number of tracks to be saved is reached, the
display shows "FULL".
NOTE: If you have changed the playback mode or restarted the device, the
memory list must be reprogrammed (repeat the steps above to do this).
or . Press