Charging / Power On; Pairing The Watch With A Mobile Phone - ARMODD Silentwatch 4 Lite Bedienungsanleitung

EN

Charging / Power On

1. The watch must be fully charged before first use. Use the
charging cable supplied with the watch. Always charge for at
least 2 hours and do not move the watch while it is being
charged.
2. Connect the charging cable to the USB port of your notebook
(it must be plugged in) or conventional mobile phone adapters
(5 V) and attach the magnetic connectors at the opposite end
of the cable to the charging contacts. No contact must occur
between the magnetic pins of the charging cable with the
band or metal parts. Charging cable short-circuit or band
damage may occur. Always charge the watch with the band
unfastened.
3. If the display does not come on on its own, press and hold the
button 2 for at least 3 seconds.
73

Pairing the watch with a mobile phone

Watch settings and the current time and date and their proper
operation require that the watch be paired with a mobile phone via
the Da Fit app. Do not connect the watch to your mobile phone via
your phone's Bluetooth; always use the app. You can download
the app using the QR code or look it up in Google Play or the App
Store.