Installation Precautions - LG BG630 Benutzerhandbuch

Installation

Installation Precautions

Place the projector in a well-ventilated
y y
environment.
- To prevent internal heat from
building up, install the projector
in a well-ventilated place.
Do not place anything near the
projector as this may block its
air vents. If the air vents are
blocked, the internal tempera-
ture will increase.
- Do not place the projector on
a carpet or rug. If a product
has its inlet vent on its bottom,
do not block the vent and use
the product on a leveled solid
surface.
- Be sure to prevent foreign ob-
jects, such as scraps of paper,
from entering the inlet vent.
- Leave an adequate distance
(30 cm or more) around the
projector.
PREPARATION
Do not place the product in a hot
or humid environment.
- Do not place the product in a hot,
cold, or humid environment.
Do not place the product in a dusty
y y
place.
- This may cause fire.
Never open any cover on the projec-
y y
tor. There is a high risk of electric
shock.
The projector is manufactured using
y y
high-precision technology. You may,
however, see tiny black dots and/
or bright colored dots (red, blue or
green) that continuously appear on
the projector screen. This is a normal
result of the manufacturing process
and does not indicate a malfunction.
The remote control may not work
y y
in an environment where a lamp
equipped with electronic ballasts or
a three-wavelength fluorescent lamp
is installed. Replace the lamp with an
international standard lamp for the
remote control to work normally.
17