Zipper Maschinen ZI-WP400TN Betriebsanleitung Seite 36

ZIPPER MASCHINEN GmbH
ZI-WP400TN
www.Zipper-Maschinen.at
3. Pull the cotter pin and washer out of the return
guiding pipe.
4. Remove the M8×50 screw, washers and the
nut securing the chain.
5. Lower the log carriage slowly towards the
ground.
6. Remove the four M5×10 screws and washers
from the saw blade guard and also from the
outer saw blade cover.
MAINTENANCE
36