Beatfoxx SD-BP30 Silent Disco V2 Bodypack-System Benutzerhandbuch Seite 13

Microphone input: Use that input to connect your Microphone (3.5mm Jack)
Audio input: Use that input to connect your Audio source (CD-Player, Smartphone
etc)
Menue (M): long press to activate the functions adjustment:
Channel Switch / Audio Volume / Microphone Volume
Press the 'M' key until you see the frequency characters (Channel) blink on LCD
screen, then press UP/DOWN arrow to choose the preferred frequency/channel.
Press M shortly again or wait a second. The display stops blinking and stores the
chosen adjustment.
Please make sure that the chosen frequency/channel on transmitter and
receiver(s) is the same. Otherwise, no signal can be transferred successfully
If numerous transmitters are used, then the users of the portable receiver can
choses in their receiver- menu, the respective channel of the transmitter
which they want to listen to.
Press the 'M' key until you see the frequency characters blink on LCD screen, then
press the 'M' key again to see "AU"(AUX) characters blink on LCD screen.
Then please press UP/DOWN arrow to Adjust audio/music signal volume level.
Press the 'M' key until you see the frequency characters blink on LCD screen, then
press the 'M' key again to see "VO" (Voice) characters blink on LCD screen.
Then please press UP/DOWN key to Adjust microphone volume to your required
level.
USB Charge port: If you use rechargeable batteries, this port can be used to
charge the batteries, when rechargeable batteries 1.2V 2500 mAh are used.
MUTE function : Press shortly "On/Off" to mute your Microphone. Press shortly
again to re-activate it.
BP-30 Bodypack Transmitter technical Specification
Modulation:
Transmitting Frequency (3 Channels)
RF Power:
Modulation Frequency offset:
Microphone Input Voltage:
Working Voltage:
Working Current:
Work Time( with new batteries)
Charge Voltage:
Charge Current:
Charge Time:
2021-06-21 Beatfoxx BP-30 Bodypack System
BP-30 Bodypack System
UHF
Within 863-865MHz
<10mW
50KHZ
20mVp-p input
2.0~3.0V DC , Please use 2 high
quality1.5V AA Batteries(batteries are
not included in delivery). Alternatively,
rechargeable Batteries type. 1.2V 2500
mAh
90mA±10mA
Approx. 24 hours
5V
200mA
approx.. 12 hours
3