Set the rotary switch to .
5.
Turn the To-Go blender jug upside
6.
down.
→ Fig.
22
Place the To-Go blade insert on
7.
the main unit and rotate it in a
clockwise direction until it locks
into place.
→ Fig.
22
Set the rotary switch to the recom-
8.
mended speed.
→ Fig.
23
Tip: We recommend pausing oper-
ation several times when preparing
smaller quantities of baby food in
the To-Go blender jug.
Processing can also take place
with instantaneous switching.
→ "Using instantaneous switching",
Page 35
Process the ingredients until you
9.
achieve the required result.
To end the operation, set the rotary
10.
switch to .
→ Fig.
24
7.10 Closing the To-Go
blender jug
Requirement: The appliance has
stopped.
Turn the To-Go blender jug anti-
1.
clockwise and remove it from the
main unit.
→ Fig.
25
Turn the To-Go blender jug and un-
2.
screw the To-Go blade insert.
→ Fig.
25
Insert the seal for the lid.
3.
→ Fig.
26
Close the mouthpiece on the lid.
4.
→ Fig.
26
Screw the lid and the To-Go
5.
blender jug in tightly.
→ Fig.
26
Cleaning and servicing en
Cleaning and servicing
8 Cleaning and servicing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.
8.1 Dishwasher-safe compon-
ents
Find out here which components can
be put in the dishwasher.
ATTENTION!
Some parts may be damaged if they
are put in a dishwasher.
Only put dishwasher-safe parts in
▶
the dishwasher.
Only use programmes that do not
▶
heat the water above 60 °C.
Do not wedge plastic parts in the
▶
dishwasher.
This overview describes the cleaning
process for the components.
→ Fig.
27
8.2 Cleaning products
Find out here which cleaning
products are suitable for your appli-
ance.
ATTENTION!
Using unsuitable cleaning agents or
incorrect cleaning may damage the
appliance.
Do not use cleaning agents con-
▶
taining alcohol or spirits.
Do not use sharp, pointed or metal
▶
objects.
Do not use abrasive cloths or
▶
cleaning agents.
37