Technical Information; Installation - ZANKER KBA22412SK Benutzerinformation

1
2
1
2. Replace the lamp with one of the same power and
shape, specifically designed for household
appliances. (the maximum power is shown on the
light bulb cover).
3. Reassemble the lamp cover.
4. Connect the plug to the mains socket.
5. Open the door.

Technical information

Technical data
Dimensions of the recess
Height
Width
Depth
Rising time
Voltage
Frequency
The technical information are situated in the rating plate,
on the external or internal side of the appliance and in
the energy label.

Installation

Warning! Refer to Safety chapters.
Positioning
This appliance can be installed in a dry, well ventilated
indoor where the ambient temperature corresponds to
the climate class indicated on the rating plate of the
appliance:
All manuals and user guides at all-guides.com
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to "Installation".
3. If necessary, replace the defective door gaskets.
mm
mm
mm
Hours
Volts
Hz
Make sure that the light comes on.
Contact the After Sales Service.
1225
560
550
12
230 - 240
50
Climate Ambient temperature
class
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
19