• Vacuum the residual ash
• Re-assemble all the components in reverse or-
der
• Check the condition and tightness of all the
seals
• Check the condition of all internal components
and make sure they are clean
• Make sure the flue gas outlet connection is
sealed and clean
• Remove any deposits of pellet residues in the
tank
• Check the correct operation of the appliance
• Reset any warnings or alarms (the manual re-
set thermostats are on the rear of the appliance
near the power cable).
• Check the correct functioning of the door block
springs
004778740 - 14/06/2021
ITALIANO
ENGLISH
Fig. 58
Fig. 59
FRANÇAIS
DEUTSCH
ESPAÑOL
79