Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6
Repositioning cable carriage and rising
channel.
[Fig. 6] If the cable feeds and the rising channel on the table
are to be repositioned from the right side (14) to the left side
(15) (or vice versa), the carriage must be turned and on the
carriage position (16) of the strain-relief device relocated.
The sloping side (17) of the carriage always points to the table
leg with the rising channel.
For the order of the individual assembly steps, see Pages 2
and 3. However, the necessary excess lengths are different.
8
All manuals and user guides at all-guides.com
(15)
Installing the computer, computer and
rising channel on the same side:
Release the knurled screw and move the cable guide carriage
so that clearance for cable installation (18) under the table
is accessible. Feed the cable for the computer from the cable
tray over cable rack (18) to the computer and connect.
Position the carriage again up to the side stop on the table
leg. Screw the carriage to the cable channel with the knur-
led screw.
Installing the computer, computer and
rising channel on different sides:
Feed the cable for the computer from the cable tray over cable
rack (18) to the computer and connect.
(18)
(14)
(16)
(17)
Werbung
