Fixture Assembly & Installation; Connect The Led Light Bars - Lumatek ZEUS 1000W Pro Bedienungsanleitung

6.1 Fixture assembly & installation
The fixture frame uses a folding design for easier use and storage. After removing the components from the
packaging, open the frame fully.
There is a hinge-lock metal plate for each hinge to secure and balance the fixture. Align each plate correctly
with hinge and push onto outside of frame/hinge and click into place.
Fig. hinge-lock plates connect by pushing onto outside of frame over each hinge.

6.2 Connect the LED light bars

Warning! The light bars are shipped with protective plastic covers over the diodes.
Please ensure these protective covers are removed before use!
Install hook end first;
insert hook into square hole.
Assemble the rest of the light bars into the fixture frame.
Attach metal cable hangers to the mounting hooks inside of frame.
Then insert the other end; align the light bar's
magnet connector with the round hole on Frame
connector and insert male pin into female socket.
Ensure magnetic connection is secure.