Using The Fan - BRAYER BR4953 Bedienungsanleitung

8 EN
• When you use the remote control, direct it to the front
part of the fan body.
• The distance between the remote control and the fan
should not exceed 5 m, the coverage angle should
be up to 30 degrees.
• Avoid exposing the receiver to direct sunlight,
otherwise false activation of control commands is
possible.

USING THE FAN

• Place the fan base (1) on a flat, dry and steady
surface.
• Do not place the fanon soft surfaces, such as carpets
with high pile, sofas or beds.
• Plug the power cord into the mains socket, the on/off
button indicator (9) will light up.
Switching the fan on/off and selecting the airflow
speed
• To switch the fan on, press the button (9) «
the control panel (3) or the button (19) «
remote control (18), you will hear a sound signal, and
the fan will switch on at low airflow speed, the symbol
(14) « » will light up on the display (13).
• Pressing the button (17) «
(3) or the button (20) «
you can select the airflow speed, the symbols (14)
» on
» on the
» on the control panel
» on the remote control (18)
«F1, F2, F3» will appear on the display.
• To switch the fan off, press the button (9) «
the control panel or the button (3) «
control (18). The fan will be switched off.
Fan operation time timer
• To set the operating time of the fan, press the button
(16) « » on the control panel (3) or the button (22)
« » on the remote control (18), you will hear a sound
signal and the digital symbols (14) on the display
(13) will show the timer operation time «0:0» and the
symbol (10) « » will appear.
• Press again the buttons (16 or 22) to set the timer
operation time. Timer operation time can be set from 1
hour to 15 hours with 1 hour setting step.
• To switch off the timer, repeatedly press button (16 or
22) until the « » icon (10) on the display (13) goes
out.
Switching the fan body oscillation on/off
• To switch the fan body oscillation on, press the button
(15) « » on the control panel (3) or the button (23)
« » on the remote control (18), the display (3) will
show the symbol (18) «
off, press again the button (15) «
panel (3) or button (23) «
» on
» on the remote
», to switch the oscillation
» on the control
» on the remote control