Safety Information - intimus FlashEx Betriebsanleitung

GB
Contents
1 Safety Information . . . . . . . . . . . . . . . 9
2 Startup . . . . . . . . . . . . . . . . . . . . . . . . 10
2.1 Area of application . . . . . . . . . . . . . . . . . . . . . . . .10
2.2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
3 Operation . . . . . . . . . . . . . . . . . . . . . . 10
3.1 Mains switch (Emergency-stop) . . . . . . . . . . .10
3.2 Keybord operator unit . . . . . . . . . . . . . . . . . . . .10
3.3 „Feed slot" operator unit . . . . . . . . . . . . . . . . . .11
3.4 Turning the machine on . . . . . . . . . . . . . . . . . . .11
3.5 Starting the shredding process . . . . . . . . . . . .11
3.6 Switching the machine off . . . . . . . . . . . . . . . .12
3.7 Automatic response in case
of „overloading" . . . . . . . . . . . . . . . . . . . . . . . . . .12
3.8 Automatic Vario-Speed function . . . . . . . . . . .12
3.9 Manual Vario-Speed function . . . . . . . . . . . . .12
3.10 Emptying the catch basket . . . . . . . . . . . . . . . .12
1

Safety Information

DANGER!
Risk of injury! Damage to the machine!
) The grid holes on the housing are for cooling and may not be covered or blocked!
) The machine's power supply must be near the machine and easily accessible!
) Only use the machine in closed, temperated (10-25 °C) spaces.
) Always close the open housing door slowly to prevent any damage to the electronics.
The device may not be used by several
people at the same time!
The safety elements' design is based on safe
one-person operation.
Do not perform any other work (e .g .
cleaning, etc .) on the machine while it is
shredding!
This machine is not a toy; it is unsuitable
for operation or use by children!
This machine's overall safety concept (di-
mensions, feeds, safety shutdown, etc.)
implies no guarantee for safe handling by
children.
94626 1 10/17
4 Failure . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.1 Material jam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
4.2 Material is not drawn in . . . . . . . . . . . . . . . . . . .13
4.3 Material is not fully destroyed . . . . . . . . . . . . .13
4.4 Motor protection . . . . . . . . . . . . . . . . . . . . . . . . .13
4.5 Failure checklist . . . . . . . . . . . . . . . . . . . . . . . . . . .13
5 Maintenance / Disposal . . . . . . . . . 14
5.1 Lubricating the cutting mechanism . . . . . . .14
5.2 Disposal of the machine . . . . . . . . . . . . . . . . . . .14
6 Technical Data . . . . . . . . . . . . . . . . . . 14
7 Accessories . . . . . . . . . . . . . . . . . . . . . 14
8 Certificate of conformity . . . . . . . . 15
Risk of injury! Keep loose clothing, neck-
ties, jewelry, long hair or other loose ob-
jects away from the inlet!
Risk of injury! Do not grab the inlet with
your fingers!
In case of danger, disconnect the machi-
ne with the main switch or emergency
stop button, or disconnect the power
plug!
Disconnect the power plug before ope-
ning the machine!
Only a professional may perform repairs!
FlashEx
9