Installing The Charging Station - nedis WIFIVCL001CBK Kurzanleitung

• This product may not be used by persons (including children)
whose physical, sensory or mental capabilities or lack of
experience and knowledge prevents them from using the product
safely without supervision or instruction.
• Children should be supervised to ensure that they do not play with
the product.
• Do not immerse the product, the power cable or plug in water or
other liquids.
• Do not use the product to collect water or other liquids.
• In the event of a leaking battery, do not allow the liquid to come in
contact with the skin or eyes. If contact has been made, wash the
affected area with copious amounts of water and seek medical
advice.
• The product is delivered with a partially charged battery. For
optimal battery life, fully charge the battery before first use.
• Do not use any charger other than that specifically provided for
use with the equipment.
• The charger must only be plugged into an earthed socket-outlet.
• Stop the charging process if the product gets too warm.
• Only power the product with the voltage corresponding to the
markings on the product.
• Children of less than 8 years should be kept away.
• Cleaning and user maintenance shall not be done by children
without supervision.
• Keep hair, loose clothing, fingers and all body parts away from
openings and moving parts.
• Keep the product away from heat sources. Do not place the
product on hot surfaces or near open flames.
• Do not let the power cable touch hot surfaces.
• Do not let the power cable hang over the edge of a table or
counter.
• Do not pull the power cable over sharp edges.
• Do not sit on the product.
• Make sure to remove all loose and fragile objects, cables, wires and
cords from the floor to avoid them being damaged by the product.
• Do not place the product in a place where it can easily fall off.
• Check if the power cable is properly connected to the product and
the power outlet.
• Make sure to inform other members of the house when the
product is in use to prevent tripping over the product.
• Do not exceed the maximum operating temperature of the
product.
• Do not vacuum flammable or combustible materials (lighter fluid,
gasoline, etc.) or use in the presence of explosive liquids or vapor.
• Do not vacuum toxic material (chlorine bleach, ammonia, drain
cleaner, etc.)
• Do not vacuum hot coals, cigarettes, matches or any hot smoking
or burning objects.
• Do not use in an enclosed space filled with vapors given off by
oil-based paints, paint thinner, moth proofing, flammable dust, or
other explosive or toxic vapors.
• Do not vacuum hard or sharp objects such as glass nails, screws,
coins etc.
• Do not put any objects into openings. Do not use with any
opening blocked.
• Do not disconnect the product by pulling on the cable. Always
grasp the connector and pull.
• Do not close a door on the power cable.
• Do not use without filters in place.
• Do not open the battery pack or the motor area. There are no user
serviceable parts inside.
• Do not use the product in a highly reflective environment. For
example an environment exposed to direct sunlight, or with
mirrors nearby.
Explanation of the safety symbols on the
product
Icon Description
Indication to explain that the product should
not be used in a bathtub, shower, or water-filled
reservoir.

Installing the charging station

-
Do not use the product in a highly reflective environment. For
example an environment exposed to direct sunlight, or with
mirrors nearby.
-
Do not place any objects within 1.5 m in front of the charging
station A i and 0.5 m of the left and right side of A
1. Place A on a stable and flat surface, against a wall or
i
immovable object to prevent it from sliding.
Make sure that the robot vacuum cleaner A
4
for return at the end of a cleaning cycle.
2. Insert the power cable A
3. Connect the other end of A
Installing the Nedis SmartLife app
The functions and details of the Nedis SmartLife app may
4
change slightly due to continuous development and upgrades
of the app. The specific functions and details of the app are
subject to the actual version.
1. Download the Nedis Smartlife app for Android or iOS on your
phone via Google Play or the Apple App Store.
2. Open the Nedis Smartlife app on your phone.
3. Create an account with your mobile phone number or your e-mail
address and tap Continue.
4. You will receive a verification code on your mobile phone or
e-mail address.
5. Enter the received verification code.
6. Create a password and tap Done.
7. Tap Add Home to create a SmartLife Home.
8. Set your location, choose the rooms you want to connect with
and tap Done.
Adding the product to the SmartLife app (image
D)
1. Switch on the product.
2. Tap + in the Nedis SmartLife app.
3. Select the device type you want to add from the list.
4. Press and hold the Wi-Fi button A
5. A
3 starts blinking to indicate pairing mode is active.
6. Follow the instructions in the Nedis SmartLife app.
Make sure you connect the product to a 2.4 GHz Wi-Fi network.
4
7. Rename the product after it has been found and added.
8. After confirming you can control the product with your
smartphone.
Remove protective strips
The robot is protected with two protection strips that has to be
4
removed before use.
1. Pull the two protective strips out of both the sides of A
The product is now ready for use.
Placing the side brushes (image E)
1. Carefully place A
1 upside down on a soft surface.
2. Place A
t .
A t are indicated with L and R marks. Make sure the mark on
4
the side brush matches the mark on A
6
i
1 has a clear path
into the power port A
a o .
a to a power outlet.
3 for 3 seconds.
.
1
.
1 .