Page EN-18
Operation
Lighting
WARNING
Risk of injury!
■ If one of the LEDs ceases to work, it
must be changed by an authorised
service technician.
Note for the service technician:This
exhaust hood requires LEDs with the
ILCOS D-Code DSR-1.5/65-S-64, DC
12V, 1.5W
Your exhaust hood is equipped with four LED
lights. The lights can be switched on or off in-
dependently of the fans.
To switch the lights
• on, touch the
sensor (19).
In addition to the lamps, the sensors
and
(20) light up.
• off, touch the
sensor (19).
The lamps and sensors
go out.
Energy saving tips
– Only switch on the fan when needed; other-
wise, energy will be wasted.
– Let the fan run as long as cooking fumes or
steam are present.
– The fan is not needed when cooking only
briefly or warming up foods that have little
or no odour.
– Ensure that there is enough supply air; oth-
erwise, the exhaust hood may not function
optimally. If necessary, open the window or
kitchen door.
– Clean the grease filters (23) regularly.
(19)
(19) and
(20)