Safety Notes; Installation Instructions; Technical Data; Symbol Description - HANSGROHE AXOR Citterio 39452000 Gebrauchsanleitung, Montageanleitung

Safety Notes

• Gloves should be worn during installation to prevent
crushing and cutting injuries.
• The shower system may only be used for bathing,
hygienic and body cleaning purposes.
• Do not allow the streams of the shower touch sensitive
body parts (such as your eyes). An adequate distance
must be kept between the shower and you.
• The product may not be used as a holding handle. A
separate handle must be installed.
• The hot and cold supplies must be of equal pressures.

Installation Instructions

• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be oberserved.

Technical Data

Operating pressure:
Recommended operating pressure:
Test pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Recommended hot water temp.:
Thermal disinfection:
Safety against backflow
The product is exclusively designed for drinking water!
4
English
max. 1 MPa
0,1 - 0,5 MPa
1,6 MPa
max.70°C
65°C
max. 70°C / 4 MPa
Assembly see page 31

Symbol description

Do not use silicone containing acetic acid!
Dimensions (see page 40)

Flow diagram

(see page 40)

Hand shower

Bath Spout
Operation (see page 36)
Maintenance check valve (see
page 38)
The check valves must be checked regularly
according to DIN EN 1717 in accordance
with national or regional regulations (at least
once a year).
Maintenance Secuflex hose (see
page 38)
Repeat cleaning when pull out becomes
difficult.
Spare parts (see page 41)
Test certificate (see page 40)