Handle Installation; Operation - Klarstein FRESHAIR Bedienungsanleitung

EN
20

HANDLE INSTALLATION

Remove the seal on the right side. Take
the screws out of the bag in the cabinet
and insert the screws into the holes
where the handle is to be mounted.
Align the handle with the screws and
tighten the screws with the screwdriver
until the handle is flush and tight. Do not
overtighten the screws as this may cause
damage to the door surface.
A = Door frame
B = screw hole
C = screw
D = door handle

OPERATION

1 Press and hold the key to switch the device on and off.
To lock and unlock the control panel, press and hold keys 1 and 2
2
simultaneously
3 Switches the interior lighting on and off.
4 Displays the temperature.
5 Increases the set temperature by 1 °C/°F with each pressure.
6 Decreases the set temperature by 1 °C/°F with each press
Press and hold buttons 5 and 6 simultaneously to change the temperature
7
display to Fahrenheit or Celsius.