Electrolux GT200 Benutzerinformation Seite 66

66 www.electrolux.com
3.1 Dimensions
W1
H1
W2
Overall dimensions
H1
W1
D1
1) the width, height and depth of the appli‐
ance without the handle
Space required in use
H2
W2
D2
1) the height, width and depth of the appli‐
ance including the handle, plus the space
necessary for free circulation of the cooling
air
Overall space required in use
H3
W2
H2
D1
85°
H3
D2
1)
mm 845
mm 1026
mm 612
1)
mm 945
mm 1226
mm 777
1)
mm 1460
mm 1226
Overall space required in use
D2 mm
1) the height, width and depth of the appli‐
ance including the handle, plus the space
necessary for free circulation of the cooling
air, plus the space necessary to allow door
opening to the minimum angle permitting
removal of all internal equipment
3.2 Location
The appliance should be installed well
away from any sources of heat, such as
radiators, boilers, direct sunlight, etc.
• Place the appliance in a horizontal
position on a solid surface.
• Make sure that the appliance stands
level.
This can be achieved by two
adjustable feet at the bottom on the
left side of the appliance. Unscrew the
feet anticlockwise to set them higher.
• To achieve the best performance, do
not place the appliance below
overhanging wall units.
• Make sure the air can circulate freely
around the appliance.
If, due to different installation, proper
ventilation requirements are not
respected, the appliance will function
1)
777