Technical Specifications - ECG TK 2080 DR Bedienungsanleitung

First switch off the convector using the button on the display (or the controller) and the main 0/I switch,
then pull the cable out of the mains socket!
Any handling of the device can only be performed if the switches are off and it is disconnected from
the electrical outlet!
CLEANING
• Before cleaning always unplug the power cable from the outlet and let it cool entirely.
• Clean the out surface with a damp cloth and polish it with dry cloth. Do not use detergents or abrasive
cleaners and prevent water from entering the device.
• If you do not plan to use the device for a longer period of time, you should store it in a clean and dry place
protected from dust. It is best to store the appliance in the original package to prevent dust from entering
the device.

TECHNICAL SPECIFICATIONS

3 power levels 750/1250/2000 W
Nominal voltage: 220–240 V~ 50-60 Hz
Power input: 1800-2000 W
Remote controller: 1× Lithium battery 3 V CR2032 (included)
Noise level: ≤ 45dB
USE AND DISPOSAL OF WASTE
Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into plastic
recycling containers.
DISPOSAL OF THE PRODUCT AT THE END OF LIFE
Disposal of electric and electronic equipment (valid in EU member countries and other European
countries with an implemented recycling system)
The represented symbol on the product or package means the product shall not be treated as domestic waste.
Hand over the product to the specified location for recycling electric and electronic equipment. Prevent negative
impacts on human health and the environment by properly recycling your product. Recycling contributes to
preserving natural resources. For more information on the recycling of this product, refer to your local authority,
domestic waste processing organization or store, where you purchased the product.
This product complies with the requirements of the EU directives on electromagnetic compatibility
and electrical safety and the issue of heavy metals in electrical and electronic equipment. It also
meets the relevant energy performance requirements.
The operating manual is available on internet at www.ecg-electro.eu.
Changes of text and technical parameters reserved.
08/05
9