Using The Pivoting Branch Saw Attachment - Fuxtec FX-EK700 Original Bedienungsanleitung

ORIGINAL BEDIENUNGFSANLEITUNG/ORIGINAL USER MANUAL/MANUAL D´UTILISATION ORIGINAL
FUXTEC FX-EK700 rev1

14. Using the pivoting branch saw attachment

IMPORTANT: Do not mount or adjust the attachment unless the device is
turned off.
The mounting of the swiveling branch saw attachment is the same as for the
other accessories:
1). Place the drive axle against the main shaft so that the hole of the axle is aligned with
the locking pin of the connecting piece.
2). Actuate the locking pin and insert the drive axle into the main shaft. Release the
locking pin and ensure that the locking pin engages in the hole.
3). Turn the wing screw clockwise to secure the connection.
Use the pivoting branch saw attachment:
Step one: Pull the black handle downwards for adjustment.
Step two: Adjust the tilt angle of the branch, saw attachment as desired.
2.
1.
122