Troubleshooting - Miroir M600 Full HD Pro Schnellstartanleitung

Your Miroir Full HD Pro Projector
C
J I

Troubleshooting

The image is blurry
• Adjust the projected image's focus by rolling the focus wheel forwards or
backwards.
• Check that the surface you are projecting on is smooth and non-reflective.
• Check that the projector's lens is clean and free of debris.
The image is not square
• Check that the projector's lens is parallel to your projection surface and
that your projection surface is flat.
No sound
• Check the volume control on your source device to ensure the volume
is turned up.
• Check the volume control on the projector to ensure the volume is
turned up.
• If you are using an adapter, verify that the adapter supports audio.
• Check that the HDMI cable is fully plugged into the HDMI port.
F D E G H A
K L
B
M
N
A
Battery Indicator Lights - Lights flash in turn as the device charges.
The battery is fully charged when all the lights illuminate and no
longer flash.
B
Lens Cover - Slide open to turn power on/off
C
Audio Out (3.5mm) - (Optional) Connect an external speaker or
headphones.
D
HDMI Video Input - Connect an HDMI cable to a device that supports
HDMI video output.
E
USB Power Output - Connect a USB power cable to provide power to a
HDMI streaming stick or to charge a smartphone battery. Cannot be
used for video input.
F
USB-C Video/Charge Input - Connect any compatible USB-C charge/
video cable to a device that supports USB-C video output, or power
adapter that supports charging. (USB-C cable not included)
G
Reset Button - Press to reset projector.
H
Power Port - Connect included AC Adapter/Charger for power. Fully
charge battery before the first use (approx. 4-5 hours).
I
Mode Button - Long press mode button to change from ECO to Normal
Mode. Normal mode is maximum brightness but shorter battery life.
J
Controls - Increase/decrease the volume output of the projector.
K
Focus Controls - Turn wheel to adjust focus.
L
Rubber Foot Pads - Provides stability and proper airflow to cooling vents.
M
Tripod Mount - Will fit a standard sized tripod screw. Tripod not included.
N
Cooling Vent - IMPORTANT: Do not cover or block airflow to the vent.
No Signal Message
• Check that you are using the required cable and/or adapter.
• If you are using a digital AV adapter, check that the adapter is an
authentic Apple adapter and is compatible with your model phone
or tablet.
• If you are connecting via USB-C, check that you are using a USB-C cable
that is labeled "USB-C Video". Some USB-C cables do not support video.
• If you are connected to a laptop or computer, check your computer
display settings to ensure a multiple display option is selected (such as
"mirror these displays").
• Check that your source device supports HDMI video out or USB-C
video out.
Projector will not power on, or stay powered on
• Check the battery life of the projector by briefly pressing the power
button on the projector. If one or fewer lights illuminate, charge the
battery with the USB-C cable or power adapter.