Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Cleaning the Suction Hose
1. You can disconnect the hose from the
vacuum cleaner to thoroughly clean the
suction hose from blockages.
2. To disconnect the hose, press both releasing
buttons (see arrows on the right hand
picture) simultaneously and pull off the hose.
3. Thoroughly clean the hose and remove dirt
particles. Also clean the suction opening of
the vacuum cleaner.
4. Reinsert the hose into the suction opening
and press the hose firmly against the
adaptor. The releasing buttons of the suction
hose will audibly snap in place.
Cleaning the Bottom Suction Opening
1. If necessary, you can detach the
suction hose from the bottom suction
opening. By doing this you easily can
remove lint balls or large objects that
have been sucked in accidentally.
2. Unscrew
the
thoroughly clean both openings.
3. Re-attach the suction hose in reverse
order and tighten the screws. Screw the
screws only hand tight.
All manuals and user guides at all-guides.com
Cleaning the Accessory
four
screws
and
24
Werbung
Inhaltsverzeichnis
