Blaupunkt VIO-DP20 Kurzanleitung Seite 8

Step 12
Now the camera is configured, and you can enjoy live
streaming.
Step 13
Setting up motion detection and push notifications:
- Go to Device manager  select the desired camera and press the Config Device icon
press Video detect  Motion Detection and enable motion detection.
- For more information regarding motion detection please refer to the "help menu"  chapter
"device manager".
To receive push notification on your smartphone:
-
o Go to Alarm manager
button to turn it ON
o Choose the push notification trigger "Motion Detect" and select "IPC"
o Press the back button and press the top right save button
o Check on push configuration that the camera is not displayed as "Close"
Note
 To know more about the App, check our Help menu. There you
will find a brief explanation for each App menu.
 For troubleshooting go to our FAQ inside the Help menu.
 For more information about manuals, firmware versions, etc.,
 visit our website or contact your local service support.
http://security.blaupunkt-service.com
Note:
 Activating WPS (Wi-Fi Protected Setup)
function on the camera will close the Wi-Fi
configuration.
 If the Wi-Fi configuration failed, please try
again or check the Wi-Fi password.
 If the camera registration is still not working,
perform a factory reset by pressing the reset
button (see chapter 2) for 15 seconds and try
again.
 To learn in a camera to another smartphone,
use the Device card or Network search feature.
For more information refer to the "help
menu".
 press Push Config  Select the desired camera and press on the
to save the changes.

6