Warranty Disclaimer - ISY IWB 6200 Gebrauchsanleitung

4. Intended use and specifications
• The bracket is used for wall mounting flat panel displays
for non-commercial, private household use.
• The bracket is only intended for use within buildings.
• Use the bracket only for the intended purpose.
Maximum load bearing
capacity:
Screen size:
Depth:
Angle:
Pivoting range:
Wall mounting plate
dimensions:
Mounting holes:
5. Installation requirements and installation
Note
• Only mount the TV wall bracket with the help of a
second person. Get the support and help you need.
• Different end devices have different options for
connecting cables and other devices. Before
installation, ensure that the necessary connections will
still be accessible after installation.
• The same mounting kit is included with all of our TV
wall brackets. Depending on the product and mounting
type, you may not need to use the entire mounting kit.
Unneeded screws and other small parts may be left
over, even if the wall bracket is properly mounted. Keep
these leftover parts with the operating instructions in
a safe place, just in case you might need them later on
(e.g. should you move, sell the product, mount the wall
bracket in a different location, buy a new TV, etc).
35 kg
81.0 - 165.0 cm (US: 32" - 65")
5.6 - 51.8 cm
–/+ 10° (depends on the device)
up to 180° on 3 joints (depends
on the device)
7.3 x 29.2 cm
according to the VESA standard
200x200 – 400x400
Warning
• Before installing the bracket, ensure that the wall on
which the television is to be mounted is suitable for the
weight and make sure that no electrical wires, water,
gas or other lines are located at the installation location.
• Please note that the provided wall anchors are only
approved for concrete and solid brick walls.
• If mounting the product to walls made of other
materials, obtain suitable mounting material from a
specialist retailer.
• Observe the other warnings and safety instructions.
• Proceed step-for-step in accordance with the illustrated
installation instructions (Fig. 1 ff.).
• During installation, the hinges are to be adjusted so that
the TV can be moved side-to-side.
6. Setting and maintenance
Note
Only adjust the TV wall bracket with the help of a second
person. Get the support and help you need.
• Screws do not have to be loosened for lateral movement.
• The tilting resistance can be adjusted using the screws on
the side of the vertical TV plate (see figure 8).
• Check that the bracket is secure and safe to use at regular
intervals (at least every three months). Only use water or
standard household cleaners for cleaning.

7. Warranty Disclaimer

Imtron GmbH assumes no liability and provides no warranty
for damage resulting from improper installation/mounting,
improper use of the product or from failure to observe the
operating instructions and/or safety notes.
8. Service and Support
Please contact your retailer if you have any inquiries.
3