Herunterladen Inhalt Inhalt Diese Seite drucken

Dismantling The Bicycle Carrier; Carrying The Bicycle Carrier Without The Transport Bag; Cleaning And Care; Maintenance - BULLWING SR11 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

WARNING!
Injury to people or damage to property due to
loss of the bicycle carrier during the journey.
A bicycle carrier which is not folded up can result in
detachment of the carrier or the coupling.
Fold the carrier up before the start of the trip.
4
Check that the bicycle carrier is correctly
4
engaged. Lock the carrier if necessary as
described above, and snap in the safety guard
for the folding mechanism on the lever.

Dismantling the bicycle carrier

First release the locking bolt behind the registration plate holder.
To dismantle the bicycle carrier, proceed in the reverse order to
fitting.
Carrying the bicycle carrier without the
transport bag
Dismantling the bicycle carrier / Cleaning and Care / Maintenance
Stowing the bicycle carrier in the transport bag

Cleaning and Care

The bicycle carrier can be cleaned with a mild detergent, warm
water, and/or a soft cloth.
Remove coarse dirt and dust in advance. Do not use solvents or
similar cleaners, as these could damage the bicycle carrier.
Allow the bicycle carrier to dry by itself. Do not use a hairdryer or
other heated appliances to speed up the drying process. Clean the
bicycle carrier regularly in coastal areas and in the case of use in
winter conditions, to rinse off salt and prolong the life of the bicycle
carrier.
In prolonged periods without use (e.g. over winter), store the bicycle
carrier in a place that is dry and protected, to prolong its life.

Maintenance

Before each trip, check the bicycle carrier for wear.
Defective metal parts and tightening straps in particular must be replaced.
Please refer to our customer service for the replacement of parts.
Any modification of original parts and materials or the construction
of bicycle carrier can adversely affect its safety and serviceability.
The steel parts of the bicycle carrier are protected at the factory
against corrosion using a powder coating. If this paint coating is
damaged, please have the damage repaired professionally as soon
as possible.
Under normal conditions, the bicycle carrier only requires cleaning
and is otherwise maintenancefree.
29

Werbung

Kapitel

Inhaltsverzeichnis
loading

Verwandte Produkte für BULLWING SR11

Diese Anleitung auch für:

11585on

Inhaltsverzeichnis