Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Engineering
EN
Technical Data
EN
Wavelength
EN
Connection type
EN
Ambient conditions
EN
Ambient temperature
EN
Storage temperature
EN
Relative humidity
EN
Electromagnetic
EN
compatibility
EN
EN
Mechanical data
EN
Installation conditions
EN
Mounting type
EN
Mounting orientation
EN
EN
Enclosure material
EN
Degree of protection
EN
(IEC 60529)
EN
Pollutant class
EN
Diagnostics
EN
Status LEDs
EN
EN
Port connection
EN
Data traffic
EN
Port connection
Data traffic
For further technical data, see www.stahl-ex.com.
6
Engineering
6.1
FO cable
• The FO cables must be laid such that the bending radii of the cable used do not drop
below the minimum (observe manufacturer's information!
Typically > 30 mm in operation)
• Protect them from tensile strain and abrasion
8
Media Converter FX op is / TX SC
Series 9721/13-11-.4
1310 nm
SC plug connector
-30 ... +75 °C (observe operating instructions)
-40 ... +80 °C
< 95 % (without condensation)
tested under the following standards and regulations for
the use in the industrial sector:
EN 61326-1, IEC 61000-4-1 ... 6
on 35 mm DIN rail NS 35/15 or wall mounting
horizontal or vertical, mounting clips are included in the
delivery (observe operating instructions)
Stainless steel, powder-coated
IP20 (the Media Converter 9721 must be installed in the
Ex-Zone into a suitable protective enclosure,
see operating instructions)
corresponds to G3
LED "RJ45", lit in green
LED "RJ45", flashing green
LED "FO", lit in yellow
LED "FO", flashing yellow
The national installation instructions (e.g. IEC/EN 60079-14) must be
observed.
WARNING
226834 / 972160310010
2014-06-18·BA00·III·en·00
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
