FS FMT DWDM EDFA Schnellstartanleitung Seite 18

Check the Parameters through SNMPV1
You can also check the parameters through our remote network management system. For example,
the EDFA card has been inserted into the 3rd slot, then you should choose the corresponding MIB
document of OAP-C3-EDFA. Otherwise you can not get the information you want.
OAP-C1-EDFA.my
OAP-C2-EDFA.my
OAP-C3-EDFA.my
OAP-C4-EDFA.my
OAP-C5-EDFA.my
OAP-C6-EDFA.my
Tips:
1. You can get MIB documents from the CD attached with the products and raise any questions.
2. When the card occupies 2 slots in FMT chassis, for example, it has been inserted into the 1st and
3rd slots, then you should choose the corresponding MIB document of OAP-C3-EDFA, because the
PCI slot corresponds to 3rd slot. Similarly, if it has been inserted into the 2nd and 4th slots, then you
should choose the document of OAP-C4-EDFA.
2017/7/3 9:40
2017/7/3 9:47
2017/7/3 9:48
2017/7/3 9:48
2017/7/3 9:49
2017/7/3 9:50
17