Service; Appliance-Specific Safety Instructions For Sabre Saws; Original Accessories/Auxiliary Equipment; Information On Saw Blades - Parkside PFS 710 D3 Originalbetriebsanleitung

g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations different from those
intended could result in a hazardous situation .
h) Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for
safe handling and control of the tool in unex-
pected situations .

5 . Service

a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the
power tool is maintained .
Appliance-specific safety instructions
for sabre saws
To avoid the risk of injury or fire as well as
health risks:
■ Hold the power tool by the insulated
handles if carrying out work during which
the power tool may come into contact with
concealed power cables or its own power
cable. Contact with a live wire may electrify
exposed metal parts of the power tool and
could give the operator an electric shock .
■ Fix and secure the workpiece to a sturdy
work surface using clamps or other meth-
ods. If you hold the workpiece in your hands or
against your body only, it will remain unstable .
This can result in a loss of control .
Wear a dust mask!
■
Original accessories/auxiliary
equipment
■ Use only the accessories and additional
equipment that are specified in the
operating instructions and are compatible
with the appliance. Using attachments or
accessory tools other than those recommended
in the operating instructions can lead to a risk of
injury .
PFS 710 D3

Information on saw blades

You can use any saw blade provided it is fitted with
a suitable mount – ½" (12 .7 mm) universal shaft .
Saw blades optimised for your sabre saw are
available from retail stores in different lengths for
various purposes .
NOTE
► TPI = teeth per inch = the number of teeth per
2 .54 cm
Wood saw blade
Dimensions: 152 mm, 6 TPI
Ideal for: sawing construction wood, chipboard,
panels and plywood, and also plunge cuts .
Bimetal saw blade
Dimensions: 152 mm, 24 TPI
Ideal for: for sawing sheet metal, profiles and
pipes – flexible and break-resistant .
GB │ IE │ 5 ■