Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
MAINTENANCE
Cleaning the spray arms
It is necessary to clean the spray arms regularly for hard water chemicals will clog the spray arm
jets and bearings. To clean the spray arms, follow the instructions below:
1.
To remove the upper spray arm, hold the nut, rotate the arm clockwise to remove it.
2.
To remove the lower spray arm, pull out the spray arm upward.
3.
To remove the corner spray arm, pull out the corner spray arm upward.
4.
Wash the arms in soapy and warm water and use a soft brush to clean the jets. Replace
them after rinsing them thoroughly.
EN 21
Werbung
Kapitel
Inhaltsverzeichnis
