Operating And Menu Concepts; Menu Authorisation - schmalz SCPi Kurz- Betriebsanleitung

3 O
PERATING AND MENU CONCEPTS
The unit is operated via four buttons on the membrane keypad. Settings are made using
software menus. The operating structure is divided into settings in the basic menu and
configuration menu. Setting of the ejector in the basic menu is sufficient for standard ap-
plications. An extended configuration menu is available for applications with special re-
quirements.
The ejector is set to display mode when outside the menus. The current vacuum is dis-
played.

The unit of the current vacuum can be displayed by pressing the

Menu authorisation

Menus can be protected against unauthorised access by defining a PIN code
configuration menu.
is requested.
The menus are accessed as follows:
 Press the
 Enter the first digit of the PIN code using the
 Confirm by pressing the
 Enter the remaining digits in the same way.
 Press the
The lock is activated again automatically after the selected menu or function is exited. The
PIN code "000" must be set for permanent deactivation of the lock.

The PIN code is set to "000" on delivery, meaning the menus are not locked.
If an incorrect PIN code is entered, then

remain locked.
If the correct PIN code has been lost, then the ejector must be sent back to the
manufacturer for authorisation.
All manuals and user guides at all-guides.com
S
C H MA L Z
[Loc]
flashes in the display when the lock is active, or the PIN code
button.
button.
button to activate the menus.
SCP / SMP
I I
or buttons.
[Loc]
is displayed and the menus
GB - 6
button.
[Pin]
in the